Phase Failure Monitoring; Switchgear; Monitoring Functions - AUMA AUMATIC AC 01.2 Manual

Appendix
No. Type Parameter
38-3 U16 Low limit Uspan
38-4 U16 Hysteresis
Table 60: Phase failure monitoring
No. Type Parameter
Offset (hexadecimal) = 0x04D7
Offset (decimal) = 1239
Data length = 4 bytes
39-1 enum Adapt rotary dir.
39-2 U16 Tripping time
Table 61: Switchgear
No. Type Parameter
Offset (hexadecimal) = 0x04D8
Offset (decimal) = 1240
Data length = 2 bytes
40-1 U16 Revers. prevent. time
Table 62: Monitoring functions
No. Type Parameter
Offset (hexadecimal) = 0x04D9
Offset (decimal) = 1241
Data length = 18 bytes
41-1 enum Monitor heat. system
41-2 enum Monitor 24 V DC ext.
41-3 enum Monitor 24 V DC cust.
41-4 enum Monitor 24 V AC
41-5 enum Monitor 24 V DC intern
41-6 enum PTC trip. monit.
64
Access Default Setting value
R/W 610 Min = 0
Max = 1023
R 2 Min = 0
Max = 10
Access Default Setting value
R 1 0 : Function not active
1 : Function active
R/W 100 Min = 20 [0.1 s]
Max = 3000 [0.1 s]
Access Default Setting value
R 3 Min = 1 [0.1 s]
Max = 300 [0.1 s]
Access Default Setting value
R 0 0 : Function not active
1 : Function active
R 0 0 : Function not active
1 : Function active
R/W 1 0 : Function not active
1 : Function active
R 1 0 : Function not active
1 : Function active
R 1 0 : Function not active
1 : Function active
R 0 0 : Function not active
1 : Function active
Actuator controls
AC 01.2/ACExC 01.2 Modbus RTU
Explanation
Low limit setting of potentiomet-
er signal range (monitoring the
potentiometer span)
Hysteresis of potentiometer
Explanation
Adapt rotary direction for coun-
terclockwise rotating field
Duration until phase monitoring
trips
Explanation
Setting the reversing prevention
time
Explanation
Monitoring the heating system
in the AC
Monitoring external 24 V DC
(external supply)
Monitoring 24 V DC for custom-
er (control voltage)
Monitoring 24 V AC
Monitoring internal 24 V DC
PTC tripping device monitoring