Event Report - AUMA AUMATIC AC 01.2 Manual

Appendix
No. Type Parameter
60-6 U32 Limit trip CLOSED
60-7 U32 Limit trip OPEN
60-8 U32 Torque trip CLOSE
60-9 U32 Torque trip OPEN
60-10 U32 On time warning 1
60-11 U32 On time warning 2
60-12 U32 System starts
60-13 I32 Max. tem. controls
60-14 I32 Min. temp. controls
60-15 I32 Max. temp. motor
60-16 I32 Min. temp. motor
60-17 I32 Max. temp. gearbox
60-18 I32 Min. temp. gearbox
60-19 I32 Max. temp. MWG
60-20 I32 Min. temp. MWG
60-21 I16 Reset operating data
Table 74: Event report
No. Type Parameter
Offset (hexadecimal) = 0x04ED
Offset (decimal) = 1261
Data length = 10 bytes
61-1 U16 File size
61-2 U16 Save interval
61-3 U16 Buffer size
61-4 enum System event filter
70
Access Default Setting value
R Min = 0 [s]
Max = 4294967295 [s]
R Min = 0 [s]
Max = 4294967295 [s]
R Min = 0 [s]
Max = 4294967295 [s]
R Min = 0 [s]
Max = 4294967295 [s]
R Min = 0 [s]
Max = 4294967295 [s]
R Min = 0 [s]
Max = 4294967295 [s]
R Min = 0 [s]
Max = 4294967295 [s]
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R Min = 100 [°C]
Max = +150 [°C]
R/W
Access Default Setting value
R 548 Min = 0
Max = 1024
R 50000 Min = 1000
Max = 65535
R 50 Min = 10
Max = 100
R 31 0 : Commands
1 : Parameterization
2 : Enable processes
3 : System events
4 : Simulation
Actuator controls
AC 01.2/ACExC 01.2 Modbus RTU
Explanation
Number of limit switch CLOSED
trippings
Number of limit switch OPEN
trippings
Number of torque switch
CLOSE trippings
Number of torque switch OPEN
trippings
Total number of all time intervals
during which an on time warning
was indicated.
Max. time span during which an
on time warning was indicated.
Number of AUMATIC system
starts
Maximum temperature of con-
trols
Minimum temperature of con-
trols
Maximum temperature of motor
Minimum temperature of motor
Maximum temperature of gear-
box
Minimum temperature of gear-
box
Maximum temperature of MWG
Minimum temperature of MWG
Deleting operating data
Explanation
File size of event report
Save interval for event data from
buffer
Max. number of events in the
buffer
The event filter for System
defines which system events are
to be recorded into the event
report.