Output Data - Operation Commands; Transmitting Or Reading Out Operation Commands From The Actuator Using Register - AUMA AUMATIC AC 01.2 Manual

Description of the data interface
4.2. Output data
4.2.1. Transmitting or reading out operation commands from the actuator using register functions
Information
28
Offset (hexa- Offset (decimal)
decimal)
0x00F5 245
0x00F6 246
0x00F7 247
0x00F8 248
0x00F9 249
0x00FA 250
0x00FB 251
0x00FC 0x0147 252
1) The safety function indications via fieldbus are for information only and must not be used as part of
a safety function. The I/O signals of the SIL module must be used for this purpose.
operation commands
The master (controls) can control the slave (actuator) via the process representation
output.
To perform remote operations, the selector switch must be in position Remote
control (REMOTE).
Functions to be used:
Preset Single Register (06)
Preset Multiple Register (16)
Read Holding Register (03)
Contents (for details refer to <Description of the
input data>)
Bit: Chan 2 FailState fieldbus (byte 31)
Bit: Channel 1 activity (byte 31)
Bit: Channel 2 activity (byte 31)
Bit: Safe ESD (Byte 32)
Bit: Safe STOP (Byte 32)
Bit: SIL fault (Byte 32)
Bit: SIL function active (Byte 32)
327 Reserve
Actuator controls
AC 01.2/ACExC 01.2 Modbus RTU
1)
1)
1)
1)