Fo Connection - AUMA AUMATIC AC 01.2 Manual

Actuator controls
AC 01.2/ACExC 01.2 Modbus RTU
No. Type Parameter
Table 56: FO connection
No. Type Parameter
Offset (hexadecimal) = 0x04F4
Offset (decimal) = 1268
Data length = 6 bytes
68-1 enum FO cable monitoring
68-2 enum FO cable topology
68-3 enum FO cable baud rate
Access Default Setting value
Torque fault
Thermal fault
Phase fault
Fieldbus DOUT 1
Fieldbus DOUT 2
Fieldbus DOUT 3
Fieldbus DOUT 4
Fieldbus DOUT 5
Fieldbus DOUT 6
Fieldbus DOUT 7
Fieldbus DOUT 8
Fieldbus DOUT 9
Fieldbus DOUT 10
Fieldbus DOUT 11
Fieldbus DOUT 12
FailState fieldbus
Handwheel active
PVST active
PVST error
PVST abort
Access Default Setting value
R/W 0 0 : On (not final device)
1 : Off (final device)
R 1 0 : Loop
1 : Star/line
R 0 0 : Auto
1 : 9.6 kbit/s
2 : 19.2 kbit/s
3 : 38.4 kbit/s
4 : 45.45 kbit/s
5 : 57.6 kbit/s
6 : 93.75 kbit/s
7 : 115.2 kbit/s
8 : 187.5 kbit/s
9 : 500 kbit/s
10 : 1500 kbit/s
11 : 3000 kbit/s
12 : 6000 kbit/s
13 : 12000 kbit/s
Appendix
Explanation
Explanation
FO cable monitoring
FO cable topology
FO cable baud rate
61