Fo; Operational Info Total - AUMA AUMATIC AC 01.2 Manual

Appendix
No. Type Parameter
69-4 U16 Raw val. pos. CLOSED
69-5 U16 Potent. raw value /mV
Table 71: FO
No. Type Parameter
Offset (hexadecimal) = 0x04EA
Offset (decimal) = 1258
Data length = 28 bytes
58-1 enum FOC level channel 1
58-2 enum FOC level channel 2
58-3 U16 FOC RS-485 error
58-4 enum FO cable baud rate
58-5 S20 FOC FPGA version
Table 72: Operational info total
No. Type Parameter
Offset (hexadecimal) = 0x04EB
Offset (decimal) = 1259
Data length= 80 bytes
59-1 U32 Motor running time
59-2 U32 Motor starts
59-3 U32 Thermal fault
68
Access Default Setting value
R 0
65535
R 0
5000 [mV]
Access Default Setting value
R 0 : Chanel deactivated
1 : Level bad!
2 : Level critical, no Rx
3 : Level critical, Rx
4 : Level good, no Rx
5 : Level good, Rx
R 0 : Chanel deactivated
1 : Level bad!
2 : Level critical, no Rx
3 : Level critical, Rx
4 : Level good, no Rx
5 : Level good, Rx
R/W Min = 0
Max = 1
R 0 : LnkNr_ReversAufAktiv
1 : LnkNr_ReversZuAktiv
2 : Speed LOCAL
3 : Ladezeit Zwischenkr.
4 : Ladezeit Bootstrap
5 : Hold time Break
6 : Reversing time
7 : Hold time Restart
8 : Hold time fault elimin.
9 : Sampling intervall
10 : Ramp increment On
11 : Ramp imcrement Off
12 : FREI_FB_P70LedCtrl
13 : LnkNr_Be-
triebsmLokal
R 0
Access Default Setting value
R Min = 0 [s]
Max = 4294967295 [s]
R Min = 0 [s]
Max = 4294967295 [s]
R Min = 0 [s]
Max = 4294967295 [s]
Actuator controls
AC 01.2/ACExC 01.2 Modbus RTU
Explanation
Raw value end position
CLOSED
Potentiometer raw value /mV
Explanation
FO cable receive level channel
1
FO cable receive level channel
2
RS-485 format error of FOC
sub-assembly
FO cable baud rate
FO cables FPGA version
Explanation
Motor running time throughout
the lifetime
Number of motor starts
throughout the lifetime
Number of thermal faults
throughout the lifetime