Maintenance And Diagnostics Overview - Avaya CallPilot 600r Maintenance And Diagnostics

Note:
Avaya provides only AC power supply. The server works with a DC-to-AC converter,
however, you must ensure the converter meets the AC requirements specified on the label of
the power supply cover. To access the power supply cover, remove the server cover. For
more information about how to remove the server cover, see
server cover
Figure 3: Rear panel controls and features
Label
A
B
C
D
E
F
* Used with DC server input power supplies. This option is not available and not supported
by Avaya.

Maintenance and diagnostics overview

When you purchase your Avaya CallPilot server, the Windows operating system and CallPilot
server software are already installed on your system.
Avaya CallPilot® 600r Server Maintenance and Diagnostics
on page 74.
Control or feature
USB 0, USB 1, USB 2 (labelled
0, 1, 2 on server, from the bottom
up.)
PS/2 mouse
SCSI port
PCI card bracket (full-height) for
MPB96
Power supply
AC power input
Maintenance and diagnostics overview
Removing and replacing the
Label Control or feature
G Ground studs *
H RJ45 NIC 2 Embedded Local Area
Network (ELAN) connector for the
ELAN subnet (engraved 2 on
server)
I RJ45 NIC 1 Customer Local Area
Network (CLAN) connector for
Avaya server subnet (engraved 1
on server)
J Video connector
K COM1 DB-9 serial port
L PS/2 keyboard connector
December 2010 13