The Tracert Command - Avaya CallPilot 600r Maintenance And Diagnostics

Parameter
-a
-n count
-l size
-f
-i TTL
-v TOS
-r count
-s count
-j host-list
-k host-list
-w timeout
To run the ping command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
2. At the Command prompt, type ping <destination IP address> (for example, ping
3. Press Enter.
4. Type Exit to exit the Command Prompt window and return to Windows.

The tracert command

This utility determines the route taken to a destination.
Avaya CallPilot® 600r Server Maintenance and Diagnostics
Resolves addresses to host names.
Specifies the number of echo requests to send.
Sends buffer size.
Sets Don't Fragment flag in packet.
Specifies the Time To Live
Specifies the Type Of Service
Specifies the number of Record route for count hops
Specifies the number of Time stamp for count hops
Specifies the Loose source route along host list
Specifies the Strict source route along host list
Specifies the Timeout, in milliseconds, to wait for each reply
Result: The Command Prompt window appears.
127.0.0.1), or ping <computer name>.
Result: The system displays the ping results.
Description
The tracert command
December 2010 35