Troubleshooting your Avaya CallPilot® system
Basic hardware check
This section describes some basic checks that you can do when you start up the server.
Note:
The server faults described in the following table are hardware related and are independent
of Avaya CallPilot application faults.
To run the startup test
1. Turn on the server (A) and observe the front panel display.
Figure 4: 600r server front controls and LEDs.
20
Avaya CallPilot® 600r Server Maintenance and Diagnostics
Result: All the LEDs on the front panel illuminate for a few seconds.
Table 3: Front panel
Label
A
B
C
D
E
F
G
Description
Power button
Reset button
Critical fault LED
Major fault LED
Minor fault LED
Power LED
Disk 0 Activity (green) Fault LED
(amber)
December 2010