6. Click File → Exit.
Using TCP/IP diagnostic tools
This section describes the following TCP/IP diagnostic tools that are available for the network
adapter:
• ipconfig
• ping
• tracert
• arp
• nbtstat
• netstat
These utilities help you to verify network connectivity, test the network interface, and isolate
any configuration problems.
The ipconfig command
The ipconfig command displays IP configuration information.
ipconfig default
If you run the command without flags, the ipconfig command displays the IP address, subnet
mask, and default gateway for each adapter bound to TCP/IP.
ipconfig command syntax
The ipconfig command uses the following syntax:
ipconfig /[ ]
Avaya CallPilot® 600r Server Maintenance and Diagnostics
Result: The event log reappears.
Result: The Event Viewer closes.
Using TCP/IP diagnostic tools
December 2010
33