Replacing Memory Dimms - Avaya CallPilot 600r Maintenance And Diagnostics

Figure 23: Attaching DVD drive to bracket
14. With the black drive carrier handle in the fully open position, slide the drive assembly
15. Slide the DVD-ROM drive assembly into the chassis.
16. Tighten the blue captive screw at the left side of the drive assembly. For details, see
17. Attach the drive power and data cables at the rear of the drive. After the cables are
18. Replace the server cover. For instructions, see
19. Take off the ESD strap.
20. Replace the front bezel.
21. Plug in the peripheral devices and Ethernet cables, connect the AC power cords,

Replacing memory DIMMs

There are two Dual Inline Memory Modules (DIMMs) installed on your server. You must replace
the memory DIMMs with those in the Avaya replacement pack. Avaya does not support more
than two DIMM modules in the 600r server.
Caution:
Risk of equipment damage
Avaya CallPilot® 600r Server Maintenance and Diagnostics
back into the chassis.
A in Figure 23: Attaching DVD drive to bracket
firmly installed, the cable retention clips lock into place.
cover on page 74.
and restart the server.
Replacing memory DIMMs
on page 87.
Removing and replacing the server
December 2010 87