Stop; Components That Can Be Started And Stopped - Avaya CallPilot 600r Maintenance And Diagnostics

Courtesy stop is the preferred method for taking a component out of service.

Stop

A stop takes the component out of service immediately, regardless of whether the component is
currently processing calls. All active calls are dropped. Typically, you perform a stop only when
severe problems that are affecting a large number of incoming calls occur, or if your
organization determines a special need for it.

Components that can be started and stopped

Only the following components can be started and stopped.
Note:
If you want to start or stop more than one or two multimedia (DSP) or call (DS30X) channels,
use the Multimedia Monitor or Channel Monitor.
Component
Media Bus
MPB board
Time switch
Multimedia channel
Channels
DS30X link
To start or stop a component
1. Log on to CallPilot Manager.
2. In CallPilot Manager, click Maintenance → Maintenance Admin.
3. Click the plus sign (+) beside the CallPilot server to expand the component tree.
4. Continue clicking the plus sign (+) until the component with which you want to work is
5. Click the hardware component that you want to start or stop.
Avaya CallPilot® 600r Server Maintenance and Diagnostics
Takes all call-processing resources out of service.
Takes all call-processing resources on the selected board out
of service.
You cannot perform maintenance administration on the time
switch.
Takes the selected Multimedia Channel out of service.
Takes the selected DS30X channel out of service.
Takes the selected DS30X link out of service.
Result: The Maintenance screen appears.
visible.
Effect of stopping
Stop
December 2010 53