600R Server Display Non-Default Cmos Settings - Avaya CallPilot 600r Maintenance And Diagnostics

Maintaining the BIOS and system board firmware

600r server display non-default CMOS settings

This section describes the changes you must make to your non-default CMOS settings after
a successful BIOS upgrade. These changes are important to the operation of your server.
Note:
These settings are already enabled from the factory. You only need to change your non-
default CMOS settings if you upgrade your BIOS.
To view your non-default CMOS settings, perform the following steps:
1. Insert the CallPilot 600r DVD and select 3 from the Startup menu: Utilities (BIOS,
2. Select 3. 600r server Display Non-Default CMOS Settings.
3. Enter Y to display the text file.
98 Avaya CallPilot® 600r Server Maintenance and Diagnostics
Firmware, etc...)
Result: The Avaya CallPilot Image Menu appears.
Result: The following message appears: Enter Y to display a text file of the CMOS
settings. [Y,N]
Result: The following text file appears:
Note:
The text file that appears includes instructions to view and make changes to your
non-default CMOS settings.
******* BEGINNING OF TEXT DISPLAY*******
**************************************
*** Intel Chessne 1U BIOS Settings ***
*** Release 1 (January 26, 2006) ***
**************************************
a. During bootup press "F2" to edit the BIOS settings.
b. Under "Exit" load "Load Optimal Defaults."
c. Thereafter make the following changes:
a) BOOT->BOOT SETTINGS CONFIGURATION
QUIET BOOT [DISABLED]
December 2010