Loading And Unloading The Load Box - PRONAR T286 Operator's Manual

SECTION 2
with skin wash the area of contact with water and soap. Do NOT apply organic
solvents (petrol, kerosene).
• Use the hydraulic oil recommended by the Manufacturer.
• After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil which has lost its properties should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
• Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
• Rubber hydraulic conduits must be replaced every 4 years regardless of their
technical condition.

2.1.5 LOADING AND UNLOADING THE LOAD BOX

• Loading and unloading work should be carried out by persons experienced in this
type of work.
• Do NOT exceed permissible load weight of trailer because this may cause danger
to road traffic and cause damage to the machine.
• Do not carry people or animals either on the trailer chassis or in load boxes. The
trailer is not intended for transporting people or animals.
• Individual types of load boxes are adapted to carrying various groups of materials,
therefore the user is obligated to carefully read the load box operator's manual
and comply with its recommendations.
• The load must be arranged in load box in such a way that it does not threaten the
stability of the trailer, and does not hinder driving.
• The arrangement of the load in load box may not cause an overload on the axle
and drawbar of the trailer.
• Loading and unloading work may be carried out only when the trailer is positioned
on level and hard surface. Tractor and trailer must be placed to drive forwards.
• When unloading the load box, do NOT operate the middle frame interlock lever if
the frame is raised.
2.5
Pronar T286