Table of Contents
Advertisement
Pronar T286
FIGURE 3.5
Switching the trailer to "hook trailer" mode
(1) hook frame, (A) "tipper" position (full range), (B) "hook trailer" position (after complete
folding)
"Tipper" or "hook trailer" operation mode of the trailer is selected automatically by means
of slidable telescopic hook frame (1) - figure (3.5) , which shifts the interlock mechanism (6) -
figure (3.4). The interlock is released when the frame is shifted to position B.
IMPORTANT!
The interlock mechanism can be shifted by moving the hook frame only when the tipping
frame is in the resting position, the rear fender is withdrawn and the slides of the load box
interlock are in folded position.
The trailer is switched to "hook trailer" mode when the hook frame is shifted to position B.
In the whole range, the trailer will work as "tipper".
3.8
SECTION 3
Advertisement
Table of Contents
