Table of Contents
Advertisement
SECTION 4
Set the load box position on
the trailer frame, depending
on the load box length.
Shift the hook frame to the rear by pressing
the push-button for withdrawing the hook
frame.
The trailer must be set to "tipper" mode –
indicator light (9) is ON - figure (4.7)
Lock the load box.
Press and hold the push-button for extending
the load box interlock.
When indicator light (16) lights up, figure
(4.7) , keep the push-button pressed for 2-3
seconds.
Raise
together with the load box.
Press and hold the push-button for rising the
tipping frame until the load box is completely
unloaded. Press and hold the push-button for
3
seconds
to
automatically.
The
mechanical
cylinders will be automatically extended.
IMPORTANT
Unloading will not be stopped if the push-button is released during automatic unloading
of the load box.
the
tipping
frame
perform
the
function
suspension
interlock
4.35
Pronar T286
Advertisement
Table of Contents
