Table of Contents
Advertisement
SECTION 4
Withdraw
interlock.
Press
and
hold
withdrawing the load box interlock. Indicator
light (15) must light up - figure (4.7). When
indicator light lights up, keep the push-button
pressed for 1-2 seconds.
If the load box interlock is not completely
withdrawn, the hook frame shifting does not
work.
Shift the load box maximally
to the rear.
Press the push-button for withdrawing the
hook frame in order to shift the hook frame
maximally to the rear until the indicator light
(10) lights up - figure (4.7).
Swing the central frame
Press and hold the push-button for rising the
tipping frame until the load box is positioned
on the ground.
The suspension interlock cylinders will be
automatically extended.
While removing the load box from the trailer,
pay attention to ensure that the load box
longitudinal members are not jammed by the
trailer's guide rollers.
The trailer's hook should be set in such a
position to enable unhitching the hook from
the trailer.
the
load
box
the
push-button
for
4.25
Pronar T286
Advertisement
Table of Contents
