Loading And Unloading The Trailer - PRONAR PT512 Operator's Manual

CHAPTER 2
occurs, consult a doctor. In the event of contact of oil with skin, wash the area of
contact with water and soap. Do not apply organic solvents (petrol, kerosene).
• Use the hydraulic oil recommended by the manufacturer.
• After changing the hydraulic oil, the used oil should be disposed of properly. Used
oil or oil which has lost its properties should be stored in original containers or
replacement hydrocarbon resistant containers. Replacement containers must be
clearly marked and appropriately stored.
• Do not store hydraulic oil in containers designed for storing food.
• Rubber hydraulic hoses must be replaced every 4 years regardless of their
technical condition.

2.1.5 LOADING AND UNLOADING THE TRAILER

• Loading and unloading the trailer must be carried out only by a person having
relevant experience.
• Before loading the trailer make sure that the wall reinforcements are installed and
secured by means of nuts. If the material being loaded does not exert force on the
side walls, the reinforcements may be dismounted. Otherwise the force exerted
by loaded material will damage the walls.
• Use only original tipping pins with a handle. Using non original pins could damage
the trailer.
• The trailer is not intended for transporting people, animals or hazardous
materials.
• The load must be arranged in such a way that it does not affect the stability of the
trailer and does not hinder driving.
• The arrangement of the load must not cause an overload on the axle of the trailer.
• Incorrect load distribution and overloading the machine may cause the trailer to
tip over or cause damage to its components.
• Do not climb on the loading case during loading.
2.5
Pronar PT512