PRONAR T286 Operator's Manual page 47

SECTION 3 Pronar T286
FIGURE 3.4 Tipping frame
(1) rear frame, (2) central frame, (3) hook frame, (4) tipping cylinder, (5) hook with latch,
(6) tipping frame interlock, (7) guide roller, (8) hydraulic interlock of load box
The rear frame (1) is equipped with two guide rollers (7) which ensure correct position of the
load box while pulling the load box on and removing it from the trailer. Rear frame (1) and
central frame (2) are connected by means of pins (which are pivot points when pulling the
load box on and removing it from the trailer) and are mechanically coupled by means of
locking pin (6).
3.7