Load Box - PRONAR T740 Manual

3.3 LOAD BOX

FIGURE 3.4 Load box construction
(1) load box (container), (2) height extension set, (3) cover tilt, (4) rear platform, (5) ladder,
(6) rear chain gearing, (7) chute slide, (8) inspection cover
The load box is constructed as a welded construction and seated on the lower frame with the
aid of weight simulators or loading link cells. On the upper part of the load box is installed a
wall extension set (2) with canvas cover (3). On the rear wall of the load box is placed the
platform (4) and folding ladder (5). In the lower part of the rear wall is the chain gearing (6).
In the container channel placed in the bottom of the load box are openings, which are closed
with inspection covers (8) – figure (3.4). in the front part is installed the chute slide (7),
controlled with the aid of a hydraulic ram. Inspection covers and chute slide are designed for
the complete emptying of the load remains from the container.
3.7