Table of Contents
Advertisement
SECTION 5
FIGURE 5.5
Design of axle brake system
(1) expander arm , (2) expander shaft, (3) adjustment bolt, (4) brake cylinder, (5) brake
cylinder piston, (6) cylinder fork, (7) fork pin
IMPORTANT!
The positions for fixing the brake cylinder in the bracket openings and the brake cylinder
pin in the expander arm are determined by the Manufacturer and must not be changed.
Each time when dismantling the pin or brake cylinder, the original fixing position should
be marked.
The inspection of the brake operation involves measuring the extension length of each brake
cylinder piston while braking at parking. If the brake cylinder piston stroke exceeds the
maximum value (45 mm), the braking system should be adjusted.
Required maintenance activities
Hitch trailer to tractor.
5.13
Pronar T286
Advertisement
Table of Contents
