PRONAR T286 Operator's Manual page 62

Pronar T286 SECTION 3
During movement of cylinder (1), oil in the system flows to axle turning cylinder (2) turning the
wheels. Rod of cylinder (1) moves when the trailer's drawbar changes its angular position
with regard to tractor hitch when manoeuvring. Hydraulic accumulators (4) are used in order
to eliminate a minimal swing of axle steering cylinder and reduce load applied to the system
while manoeuvring. On the left side of the trailer, there is a hydraulic hand pump (6) for filling
and setting the pressure in the steering system – see chapter (4.11) "HYDRAULIC
STEERING SYSTEM OPERATION".
3.22