PRONAR T286 Operator's Manual page 88

SECTION 4
FIGURE 4.5 Operation of folding hydraulic support
(1) support cylinder, (2) body, (3) valve, (4) securing pin, (5) cotter pin, (6) quick coupler, (A)
unfolding the support, (B) folding the support, (I) hole I, (II) hole II,
Unfolding the support
Unlock cotter pin (5) and remove securing pin (4) from hole (II).
Turn support foot (1) downwards –figure (4.5) item (A).
Insert pin (4) to hole (I) and secure it with cotter pin (5).
Folding the support
Unlock cotter pin (5) and remove securing pin (4) from hole (I).
Turn support foot (1) upwards – figure (4.5) item (B).
Insert pin (4) to hole (II) and secure it with cotter pin (5).
In order to operate the support:
set the valve to "O" position – open – figure (4.2).
operate the manifold in the tractor in order to lower or raise the support.
set the manifold lever in tractor to "neutral" position and set the support valve
to "Z" position - closed – figure (4.2).
4.14
Pronar T286