Table of Contents
Advertisement
Pronar T286
5.2.9
CHANGE OF PARKING BRAKE CABLE AND ADJUSTMENT OF CABLE
TENSION.
Proper operation of the parking brake is dependent on the effectiveness of the front axle
brake and the correct brake cable tension.
Adjustment of parking brake cable tension should be conducted in the event of:
• stretching of cable,
• loosening of parking brake cable clamps
• after adjustment of axle brakes,
• after repairs to axle brake system,
• after repairs in parking brake system.
FIGURE 5.7
Adjustment of parking brake cable tension
(1) brake crank mechanism, (2) brake cable I, (3) brake cable II (4) brake lever, (5) U-shaped
clamp, (6) shackle, (7) clamping nuts, (8) cable roller
5.16
SECTION 5
Advertisement
Table of Contents
