Loading Load Box - PRONAR T286 Operator's Manual

SECTION 4
Drive the trailer away from the load box in order to disconnect it.
Fold the central frame of the
trailer
Press and hold the push-button for lowering
the tipping frame until the central frame rests
on the trailer's lower frame. Press and hold
the push-button for about 3 seconds to fold
the frames automatically.
After manual folding of the frames, keep the
push-button pressed for 2-3 seconds to
ensure that the
cylinders are withdrawn.
Attach the slow moving vehicle warning sign.
ATTENTION!
When disconnecting the load box, user must take particular care that prior to lowering
the load box to the ground it shall not strike any trailer's structural elements.

4.6 LOADING LOAD BOX

Before beginning loading make certain that the load box side walls are properly closed and
secured. The trailer must be positioned to travel forwards and be hitched to the tractor.
Loading should only take place, when trailer is placed on flat level surface and hitched to
tractor.
Distribute load evenly in the load box using suitable tools (crane, loader, conveyor, etc.),
depending on type of load. Loading should be carried out by a person experienced in this
type of work and having appropriate authorisation for operating equipment (if required). Type
of load carried depends on load box use.
Due to the various density of materials, using the total load box capacity may cause
exceeding permissible carrying capacity of hook trailer. Please note that the weight of empty
suspension interlock
4.26
Pronar T286