Cleaning The Air Filters - PRONAR T286 Operator's Manual

SECTION 5
5.3.3

CLEANING THE AIR FILTERS

FIGURE 5.9 Air filter
(1) securing slide lock, (2) air filter cover
DANGER
Before proceeding to dismantle filter, reduce pressure in supply conduit. While
disengaging filter slide gate, hold cover with other hand. Stand away from filter cover
vertical direction.
Depending on trailer working conditions, but not less than once in three months, take out and
clean air filter inserts, which are located in pneumatic system connection conduits. Inserts are
used many times and are not subject to changing unless they are mechanically damaged.
Required maintenance activities
Reduce pressure in supply conduit.
Slide out securing slide lock (1) – figure (5.9).
Reduction of pressure in conduit may be achieved by pressing the
head of the pneumatic connection until resistance is felt.
5.21
Pronar T286