Hook Setting Adjustment - PRONAR T286 Operator's Manual

SECTION 4 Pronar T286

4.2 HOOK SETTING ADJUSTMENT

The hook trailer enables connection of load boxes with hitching eye at the height of 1570 mm
according to DIN 30722-1 standard) or (1 450 mm according to SS 3021 standard). Changing
height of hook should be performed by two persons. Self-locking nuts M20-8 should be
replaced with new ones and tightened using appropriate tightening torque according to table
5.9 (TIGHTENING TORQUE FOR NUT AND BOLT CONNECTIONS).
FIGURE 4.1 Hook position adjustment
(1) hook, (2) bolt, (3) nut
4.5