Load Box - PRONAR T679/4M User Manual

Construction and principle of operation

3.3 LOAD BOX

4
3
Figure 3.2 Load box
(1) load box
(4) roof
The trailer load box (1) is a shell structure.
It is made of steel sheets and steel sec-
tions - figure (3.2). Two load handles are
recessed in the side walls, while in the front
part of the load box there are two additional
handles for secure cargo fastening. In the
5
(2) hydraulic flap
(5) load handle
rear part of the box there is a rear flap (2),
opened by a hydraulic cylinder. The hatch
is opened up and down, which allows easy
loading and unloading of construction ve-
hicles. The trailer's additional equipment
is a tilt-and-turn flap (3), which allows
1
(3) tilt and turn flap
PRONAR T679/4M
Chapter 3
2
606.G.02.1
3.5