Loading And Unloading - PRONAR T900 Operator's Manual

SECTION 2

2.1.4 LOADING AND UNLOADING

• Loading and unloading work should be carried out by persons experienced in this
type of work.
• Unloading and loading of trailer may only take place when the machine is
positioned on level and hard surface and connected to tractor. Tractor and trailer
must be placed to drive forwards.
• Do NOT climb on the load box during loading and unloading.
• Before loading, make certain that there are no tools or other objects in the load
box.
• The load may not protrude further out than the upper edge of the trailer's front
wall.
• The load must be arranged in such a way that it does not threaten the stability of
the trailer and does not hinder driving.
• Incorrect load distribution and overloading the machine may cause the trailer to
tip over or cause damage to its components.
• The trailer is not intended for transporting people, animals or hazardous
materials.
• Ensure that nobody is in the unloading zone or near the tailgate. Before
unloading, ensure proper visibility and make certain that there are no bystanders
near the machine.
• Keep a safe distance from overhead electric power lines when rising the tailgate.
• Do NOT overload the trailer in excess of its load carrying capacity.
• Do NOT load the materials which may damage the trailer.
• Do NOT go or place hand between open tailgate and load box.
• If the load does not pour from the trailer when sliding the wall, immediately cease
unloading. Unloading may be started again only after removing the cause of the
problem (sticking, clogging).
• During winter, particular attention must be paid to loads which may freeze during
transport. Frozen material in the load box may damage the trailer.
2.5
Pronar T900