Table of Contents
Advertisement
SECTION 4
Fold the rear bumper
Press and hold the push-button for folding
the rear fender. After folding the fender,
indicator light (4) must light up on the control
panel - figure (4.7).
If the fender is not completely withdrawn, the
tipping function does not work.
Place the tractor and the trailer in front of the load box, in the straight line, at a
distance of about 1 meter from the load box hitch.
Withdraw
interlock (if it is extended).
Press
and
hold
withdrawing the load box interlock. Indicator
light (15) must light up - figure (4.7).
Set the trailer to "hook trailer"
function.
Shift the hook frame maximally to the rear by
pressing the push-button for withdrawing the
hook frame. If the trailer is correctly set to
"hook trailer" function, indicator light (10) will
light up - figure (4.7).
the
load
box
the
push-button
for
4.20
Pronar T286
Advertisement
Table of Contents
