SECTION 4
IMPORTANT!
Do NOT park the loaded trailer, which is disconnected from the tractor and resting on the
parking support.
Before moving off, make sure that the support is maximally raised and secured against
dropping.
4.3.1 OPERATION OF SUPPORT WITH MECHANICAL GEAR
Proper height of drawbar eye in relation to tractor hitch is set using the support with
mechanical gear - figure (4.4).
FIGURE 4.4
Support with gear
(1) support body, (2) internal pipe (3) lower foot, (4) gear crank, (4) pin, (A) position – gear I
(speed under load), (B) position – II gear (high speed), (C) neutral position, (D) lowering the
support, (E) raising the support
Raising the support
Set support crank (4) in position (B) or (A).
Position (A) is used for rising and lowering the support under load.
4.12
Pronar T286