PRONAR T286 Operator's Manual page 16

Pronar T286
TABLE 1.2 Load box requirements
Minimum length
Maximum length
Maximum width
Maximum height (internal)
Maximum gross weight
Hook height according to DIN 30722-1 standard
Hook height according to SS 3021 standard
the length from hook axis to trailer rear edge
The hook trailer is designed for work with load boxes made according to DIN 30722-1
standard and SS 3021 standard. The trailer may be used with load boxes of total length not
less than 5400 mm and not greater than 6900 mm. Width and height of load box must not
exceed the dimensions given in table (1.2).
Requirements concerning trailer operation with agricultural tractor are presented in the table
below.
TABLE 1.3 Agricultural tractor's requirements
CONTENTS
Brake system
Double conduit pneumatic system
Nominal pressure of the pneumatic
system
Hydraulic brake system
Nominal pressure of the hydraulic system
Hydraulic system
Hydraulic oil
Pressure rating of the system
Minimum oil delivery
Sockets
DATA UNIT
[mm]
[mm]
[mm]
[mm]
[kg]
[mm]
[mm]
UNIT
-
sockets compliant with PN-ISO 1728
bar / kPa
-
socket compliant with ISO 7241-1
bar / MPa
-
bar / MPa
L
- according to ISO 7241-1
1.6
SECTION 1
VALUE
5,400
6,900
2,550
2,000
17,100
1,570
1,450
REQUIREMENTS
6.5 / 650
160 / 16
HL 32
200 / 20
25