Turn Signal Lever; Headlight Flasher - Mitsubishi Mirage 2017 Owner's Manual

Turn signal lever

the light switch to the "OFF" position to stop
the tone.
Dimmer (high/low beam
change)
To change the headlights from high beam to
5
low beam and vice versa, pull the turn signal
lever to (1). Switch the headlights to low
beam as a courtesy whenever there are
oncoming vehicles, or when there is traffic
moving ahead of you. An illuminated blue
light in the instrument cluster indicates when
the headlights are on high beam.

Headlight flasher

You can flash the high beams by pulling the
lever gently toward you (2). The lights will
5-76 Features and controls
go back to normal when you let go. While the
high beam is on, you will see a blue light on
the instrument panel.
NOTE
 You can flash the high beams by pulling the
N00549900142
lever toward you, even if the light switch is
off.
 If you turn the lights off with the head lights
set to high-beam illumination, the headlights
are automatically returned to their low-beam
setting when the light switch is next turned
to the " " position.
Turn signal lever
When changing lanes, or to making a gradual
turn, hold the lever in the "lane change" posi-
tion (1). It will return to the neutral position
when you let go. Use the full position (2)
when making a normal turn. The lever will
return to the neutral position when the turn is
complete. There may be times when the lever
does not return to the neutral position. This
usually happens when the steering wheel is
turned only slightly. You can easily return the
lever by hand.
Also, when you move the lever to (1) slightly
then release it, the turn signal lights and the
N00550000185
indicator light in the instrument cluster will
flash three times.
NOTE
 A light in the instrument panel flashes to
show when the turn signal lights are working
properly.
If this light flashes faster than usual, check
for a burned out turn signal light bulb or mal-
N00522601587
functioning connection in the signal.
If the panel light does not come on when the
lever is moved, check for a blown fuse or a
burned out bulb in the panel.
Have the system inspected by your autho-
rized Mitsubishi Motors dealer or a repair
facility of your choice.
 It is possible to modify functions as follows:
• Deactivate the turn signal light 3-flash
function for lane changes.
• Adjust the time required to operate the
lever for the 3-flash function.
• Changing of the tone of a sounding buzzer
as the turn signal lights flash.