MAP5000
3.8
Install the ICP-MAP0060 Enclosure Lockset
1.
2.
3.
Figure 3.16 Install the Enclosure Lockset
4
Bosch Sicherheitssysteme GmbH
Remove the lockset knockout from the enclosure door as shown in the figure below (1).
Insert the lockset into the opening on the enclosure door as shown in the figure below
(2).
Secure the lockset with the nut as shown in the figure below (3).
Connect the long grounding cable (P/N F01U074762) to the enclosure door.
Installation Manual
Cable Connections | en
51
2014.12 | 13 | F.01U.168.332