Tamper Surveillance Of The Main Panel - Bosch ICP-MAP5000-2 Installation Manual

84 en | Appendices
Table 8.5: SES Permissions
8.3.5

Tamper Surveillance of the Main Panel

Tamper Switch with Wall Tamper
The wall tamper of the panel must be taken into account when mounting the enclosure and
installing the tamper switch (refer to Mount the Enclosure, page 17 and Install and Connect the
Tamper Switch, page 48)
Location Supervision of the Panel
External alarm signaling by means of siren and/or remote alarm signaling with communicator
must be planned in accordance with Sirens and Communicator in Accordance with EN50131
Grade 3, page 63.
–
–
Location supervision can be realized
–
–
Design Types of the Communicators According to SES
The transmission paths for remote alarm signaling are divided into
–
–
Types
EN 50131
Class 1
Class 2
Class 3
Class 4
Class 5
Class 6
Table 8.6: Communicator Types
2014.12 | 13 | F.01U.168.332
In the case of variants A, B and C with communicator(s) of Classes 3 and 4, location
supervision must be provided for the panel as soon as one or more areas are armed.
It is possible to omit location supervision for variant D with Class 5 communicator.
as a technical solution by the intrusion alarm system itself. The requirements for
disarming must be EN-compliant.
or
by security-relevant persons who guarantee that actions that pose a risk to security are
detected at all times at the time of the required location supervision.
Demand-driven connection with 25-hourly (AÜA-B25) or 5-hourly function monitoring
(AÜA-B5)
Existing connection with 3-minute (AÜA-S180) or 20-second function monitoring (AÜA-
S20)
SES
AÜA-B25
AÜA-B5
AÜA-S180
AÜA-S20
Transmission procedure
Demand-driven connection with 25-hourly function
monitoring and voice annunciation
Demand-driven connection with 25-hourly function
monitoring and simple digital transmission
Demand-driven connection with 25-hourly function
monitoring and digital transmission
Demand-driven connection with 5-hourly function monitoring
and digital transmission
Existing connection with 180-second function monitoring and
digital transmission
Existing connection with 20-second function monitoring and
digital transmission
Installation Manual
MAP5000
Bosch Sicherheitssysteme GmbH