Bosch ICP-MAP5000-2 Installation Manual page 72

72 en | Appendices
AE 4 Access for manufacturers via RPS for MAP
1.
2.
3.
4.
5.
Functions of the Access Levels
Further subdivisions are possible within the access levels if the owner wishes to grant the
users different permissions: User Manager > Permission Sets
General Permissions
May silence buzzer on control center
May change own user passcode
May transmit/receive programming with RPS
May receive history with RPS
May perform diagnostics with RPS
May perform software updates with RPS
Operations Category Permissions
May Disable Device
May Enable Device
May Turn Chime On/Off
May Change Schedule
May Edit Blocking Time
User Category Permissions
May Add User
May Delete User
May Change User Passcode
Event Category Permissions
May Clear Internal Alarm
May Clear External Alarm
May Clear Tamper
May Clear Trouble
May Clear Battery Trouble
May Silence
2014.12 | 13 | F.01U.168.332
Authorization of the manufacturer user by a AE 2 user with corresponding permissions
(control center: Main menu page 1 > Maintenance page 3 > Manufacturer Permission)
Open the control panel enclosure
Switch on Installer Mode = AE 3 (Installer Button, page 67)
Login with the passcode of the manufacturer at the installer control center (refer to
Installer Button, page 67)
Establish connection of panel to RPS
Installation Manual
MAP5000
Access Level
1 2 3 4
X X
X X X
X
X
X
X X
1 2 3 4
X
X
X X
X X
X X
1 2 3 4
X X
X X
X X
1 2 3 4
X X
X X
X
X X
X
X
Bosch Sicherheitssysteme GmbH