Installation; Installing The Enclosure - Bosch D8125 Installation And Operation Manual

D8125 | Installation and Operation Guide | 4.0

4.0 Installation

4.1

Installing the enclosure

Follow the procedure below to install the D8125 in the enclosure with the control panel or B600.
1. Align the D8125 POPEX module with any of the four mounting locations in the enclosure. See Figure 2.
2. Use the screws provided with the module to secure it in the enclosure.
Save the POPIT Label Sheets: you will use
these sheets later to label the POPITs. The
D8125 is packaged with two sets of POPIT
label sheets. One is marked for use with
the D9412/D9112. This set is used for Non
G, G, GV2, GV3, GV4, B9512G, and
B8512G. The second set of sheets is used
for D8112G/G2.
10
Installation
Horizontal Mounting
Locations
Figure 2: POPEX Installation
Bosch Security Systems B.V. | 2020.04 |F01U036298-15
Vertical
Mounting
Locations
(Reserved for
Dual Phone Line
Switcher Module)