Bosch ICP-MAP5000-2 Installation Manual page 82

82 en | Appendices
AE 4 Access for manufacturers via RPS for MAP
1.
2.
3.
4.
5.
1) Activation of the warning device on opening the control panel enclosure may be omitted if
access to access level 3 is controlled by switches, locks (at least 15,000 variation possibilities)
or other equivalent means.
Internal Warning Device when Control Panel Enclosure is Opened
An internal warning device must be provided that trips a time-limited audible alarm when the
control panel enclosure is opened in unarmed state.
–
–
Functions of the Access Levels
The assignment of the functions to the access levels 2A, 2B and 3 can be adapted in RPS:
User Manager > Permission Sets
General Permissions
May silence buzzer on control center
May change own user passcode
May transmit/receive programming with RPS
May receive history with RPS
May perform diagnostics with RPS
May perform software updates with RPS
Operations Category Permissions
May Disable Device
May Enable Device
May Turn Chime On/Off
May Change Schedule
May Edit Blocking Time
User Category Permissions
May Add User
May Delete User
May Change User Passcode
Event Category Permissions
2014.12 | 13 | F.01U.168.332
Authorization of the manufacturer user by a AE 3 user with corresponding permissions
(control center: Main menu page 1 > Maintenance page 3 > Manufacturer Permission)
Open control panel enclosure => Internal warning device is activated for 3 sec.
Switch on Installer Mode = AE 3 (Installer Button, page 67
Login with the passcode of the manufacturer at the installer control center
(Manufacturer Authorization, page 60)
Establish connection of panel to RPS
Assign device Siren to free output
In the Properties> Behavior Item List of the device Siren, activate the option Include
External Tamper Alarm Disarmed of Onboard Tamper.
Installation Manual
1
Access Level
1 2A 2B 3
X X X X
X X X
X
X
X
1 2A 2B 3
X
X
X X
X X
X X
1 2A 2B 3
X X
X X
X X
1 2A 2B 3
Bosch Sicherheitssysteme GmbH
MAP5000
4
X
X
4
4
4