24
en | Installation
Figure 2.11 Accessory Mounting Plate Overview
Element
1
2
3
4
2.8
Install the 12 V Converter
1.
2.
2014.12 | 13 | F.01U.168.332
Description
Locations for ICP-MAP0017 12 V Converters (two maximum)
Location for fuse plate (SIV) (one maximum)
Screw locations for AT 2000 Communicator (one maximum)
Screw location for AT 2000 earth ground
Mount the ICP-MAP0017 12 V converter onto the accessory mounting plate as shown in
the figure below (screws not supplied).
Connect the field wiring to the terminal block of the 12 V converter as shown in the figure
below and leave the other ends unconnected.
Installation Manual
MAP5000
Bosch Sicherheitssysteme GmbH