12
en | Introduction
For remote operation of the IPP-MAP0005 Power Supply, a control center assigned to the
same area must be provided for indication of power supply trouble (trouble in mains supply /
battery).
1.5
System Overview
Refer to Figure 1.7 System Installation in ICP-MAP0110 Control Panel Enclosure (Hinged Mounting
Plate Closed), page 12 and Figure 1.8 System Installation in ICP-MAP0110 Control Panel
Enclosure (Hinged Mounting Plate Open), page 13 for an overview of the system as it is
installed in the ICP-MAP0110 Control Panel Enclosure.
Figure 1.7 System Installation in ICP-MAP0110 Control Panel Enclosure (Hinged Mounting
Plate Closed)
2014.12 | 13 | F.01U.168.332
Installation Manual
MAP5000
Bosch Sicherheitssysteme GmbH