Install The Tae Box - Bosch ICP-MAP5000-2 Installation Manual

MAP5000
Figure 2.7 Installation of the AC Terminal Block
Warning!
When installing the power supply, ensure that the ground wire from the AC terminal block is
!
connected to the ground connection point as shown in , page 21.
The ground wire from the AC terminal block to the power supply does not provide an earth
ground for the enclosure. It only provides an earth ground for the power supply.
See also
–
–
2.6

Install the TAE Box

Refer to Figure 2.8 Install the TAE Box, page 22 when installing the TAE Box.
If the TAE Box is not mounted on the wall behind the enclosure, mount the TAE Box to the
enclosure back wall either horizontally or vertically as desired.
Bosch Sicherheitssysteme GmbH
Install the Power Supply and AC Terminal Block, page 19
Install the Power Supply and AC Terminal Block, page 21
2
Installation Manual
Installation | en
1
3
2014.12 | 13 | F.01U.168.332
21