Restart The Deskphone; Configuring Sip Settings - Avaya one-X 9601 Installation And Maintenance Manual

Resets all system values and system initialization values except AUTH and AUTH_ONLY
●
to default values.
Resets call server values to their defaults.
●
Resets the 802.1X identity and password to their default values.
●
Deletes any entries in the Redial buffer.
●
Does not affect user-specified data and settings like Contacts data or the deskphone
●
login and password. To remove this type of data, see the

Restart the Deskphone

Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
Note:
the line you want to change or the applicable softkey produces the same result as
selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
Use the following procedure to restart the deskphone.
1. When you select RESTART PHONE from the Admin Procedures Screen, the deskphone
displays a confirmation screen asking if you are sure you want to restart the deskphone.
2. Press No to return to the Admin Procedures screen without restarting the deskphone. Press
Yes to proceed with the registration steps covered in the
(Dynamic Addressing Process)
A restart does not affect user-specified data and settings like Contacts data or the
deskphone login and password.
The remainder of the restart procedure depends on the status of the boot and application
files.

Configuring SIP Settings

Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
Note:
the line you want to change or the applicable softkey produces the same result as
selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
on page 18.
Restart the Deskphone
Clear Procedure on page 37.
Power-Up and Reset Operation
Issue 1 December 2010 43