Bomag BW 219 DH-4 Service Training page 1030

18.5
REMOVAL AND DISASSEMBLY OF THE DIFFERENTIAL UNIT - ASSEMBLAGGIO ED INSTALLAZIONE GRUPPO DIFFERENZIALE -
DIFFERENTIALAGGREGAT ZUSAMMENBAUEN UND INSTALLIEREN - MONTAJE E INSTALACION DEL GRUPO DIFERENCIAL -
GB
ASSEMBLY OF THE NO-SPIN DIFFERENTIAL UNIT
Assemble the no-spin unit (13), inserting the distance piece (14)
and using stay "B".
GB
Fit the spring washers (11) onto the screws (10).
Coat the screws (10) with Loctite 270 and screw tight to form the
differential box. Tighten screws using the criss-cross method and a
torque of 86 ± 89 Nm.
20
19
GB
ASSEMBLY OF THE 45% SELF-LOCKING DIFFERENTIAL UNIT
Using a depth gauge, check the shim of friction units complete with
rings (21). If thickness is lower than 17.6 mm, add more shims (19).
CAUTION! Shims must be placed right behind the body of the
differential unit (26).
1030
ASSEMBLAGE ET INSTALLATION DU GROUPE DIFFERENTIEL
14
F1241154
a
10
F1241164
c
21
17,6
F1241224
e
54 BOMAG
13
15
GB
Fit the no-spin unit into the differential unit half box (15).
Centre the half box (12) and fasten.
CAUTION! Make sure the connection marks coincide.
GB
Remove stay "B".
21
GB
Insert in the body of the differential unit (26) any required shims
(19) and the friction (20) complete with ring (21).
CAUTION! Ring (21) must touch the planetary gear (22).
Essieu
12
F1241163
b
B
F1241150
d
20
26
F1241160
f
008 924 62