Communication Options; Communication Options - YASKAWA CIMR-JA Series Installation & Start-Up Manual

7.5

Communication Options

Table 7.8 gives detailed information about the available option units that allow Yaskawa
drives to connect to various communications networks. A host controller can control and
monitor the drive, read and change parameters by using a communication option. Refer to
Table 7.8 to determine which option unit may be necessary for a given environment. Contact
Yaskawa or your Yaskawa agent to order option units.
• Option Unit Selection: Refer to Yaskawa catalog for more details on option unit selection
and part numbers.
• Option Unit Installation: Refer to option unit manual for option unit installation
instructions.
Option Unit
Interface for Copy Unit/PC
Communication
Interface for Remote Operator
Interface for MEMOBUS/
Modbus Communication
Potentiometer Option Unit
USB Copy Unit
LED Operator
YASKAWA ELECTRIC TOEP C710606 25B YASKAWA AC Drive J1000 Installation & Start-Up Manual
Table 7.8 Available Option Units
Model
SI-232/JC Allows the drive to connect to an external device.
SI-232/J Allows the drive to connect to an external device.
Allows the drive to connect to a network using MEMOBUS/
SI-485/J
Modbus RTU protocol.
AI-V3/J Allows easy set-up of output frequency.
Allows the user to read, write, copy, and verify parameter settings.
JVOP-181 Connects to PC using a USB connector. For use with the RS-232C
detachable interface option.
Allows the user to read, write, copy, and verify parameter settings.
JVOP-182 Can be placed on the outside of an enclosure panel so the panel
door does not have to be opened to access the drive.

7.5 Communication Options

Function
7
185