YASKAWA CIMR-JA Series Installation & Start-Up Manual page 79

Frequency Reference
Power Up
Default Setting
Forward/Reverse
Drive Mode
Output Frequency Display
Output Current Display
Output Voltage Reference
Drive Mode
Monitor Display
YASKAWA ELECTRIC TOEP C710606 25B YASKAWA AC Drive J1000 Installation & Start-Up Manual
This display screen allows the user to monitor and set the frequency
reference while the drive is running.
Programming Modes on page
Note: The user can select items to display when the drive is first
STOP powered up by setting parameter o1-02.
: Motor rotates forward.
: Motor rotates in reverse.
Note: For applications that should not run in reverse (fans, pumps,
etc.), set parameter b1-04 = "1" to prohibit the motor from rotating in
reverse. This sequence also puts the drive in LOCAL mode.
Switching to reverse:
STOP
Monitors the frequency output by the drive.
STOP
Monitors the output current of the drive.
STOP
Monitors the output voltage of the drive.
STOP
Monitor parameters (U parameters) are displayed.
STOP
4.3 The Drive and Programming Modes
78.
The LED is lit when
LOCAL is selected
Refer to The Drive and
4
79