YASKAWA CIMR-JA Series Installation & Start-Up Manual page 80

4.3 The Drive and Programming Modes
Programming
Mode
Parameter Setting
Frequency Reference
Drive Mode
n Drive Mode Details
The following actions are possible in the Drive Mode:
• Run and stop the drive.
• Monitor the operation status of the drive (frequency reference, output frequency, output
current, output voltage, etc.).
• View information on an alarm.
Note: Select "Drive Mode" when running. The mode can be switched to any mode (program mode, etc.) other
than drive mode while the drive is stopped. However, the drive cannot be operated in other modes. Return
the mode to "Drive Mode" after completing periodic inspection.
Figure 4.4 illustrates changing the default frequency reference of F 0.00 (0 Hz) to F 6.00 (6
Hz) while in Drive Mode. This example assumes the drive is set to LOCAL.
80 YASKAWA ELECTRIC TOEP C710606 25B YASKAWA AC Drive J1000 Installation & Start-Up Manual
Verify Function
Lists all parameters that have been edited or changed from default
settings.
page
Setup
STOP
A select list of parameters necessary to get the drive operational
quickly.
Mode on page
STOP
Allows the user to access and edit all parameter settings.
to Parameter List on page
STOP
Returns to the frequency reference display screen.
STOP
Refer to Verifying Parameter Changes: Verify Menu on
83.
Refer to The Setup Group within the Programming
81.
197.
Refer