Operation; Setting The Application Module Labeling At Hmi - Festo CP Factory Original Operating Instructions

Hide thumbs Also See for CP Factory:

Table of Contents

Operation

8 Operation

An application module has no control elements. Operation of the application module is only possible when it

is mounted on a basic module of the CP-Lab or CP-Factory system.

The operation of the application module can be realized by every customer according to his wishes, the

supplied programs are only an operating suggestion with which the application module is on CP-Lab

or CP-Factory System can be operated. Own operating concepts or external controls are also possible.

If the application module is mounted on a CP Lab or a CP Factory basic module, the general operation for

this is described in the manuals of the CP Lab or CP Factory system. All application-specific information is

described in this manual for the application module.

1. If the application module has not yet started, click on the Setup button under Operating mode on the

home screen. The application module moves into its basic position

8065842 en

Table of Contents