Auerswald COMmander Basic.2 Installation And Commissioning Instructions page 50

Connecting ISDN End Devices
2.
Attach the wires to the two middle terminal clamps in
the internal U port. See
P0
3.
With an ISDN wall socket: Connect the IAE or UAE8
socket to the terminal clamps on the internal U
See Fig. 48, Fig. 50 and
Only U /S adapters: Connect both screw terminals
P0 0
at the back of the U
clamps on the internal U
page 50.
4.
With an ISDN wall socket: If necessary, connect the
U /S adapter.
P0 0
Further Steps
Connect the end devices to the wall socket or to the
connection sockets on the U
To finish commissioning, you need to set up an
internal phone number for each end device in the
COMset configuration manager.
Fig. 48: COMfortel 1100/1500/2500/2500 AB via
an ISDN wall socket
max. 1000 m with 0.6 mm
50
Fig. 51 on page 51.
P0
Fig. 51 on page 51.
/S adapter to the terminal
P0 0
port. See Fig. 49 on
P0
/S adapter.
P0 0
Internal U port
P0
on the PBX
Fig. 49: Connection over a fixed U
port.
Fig. 50: Connection via a U
ISDN wall socket
/S adapter
P0 0
Internal U port
P0
on the PBX
max. 1000 m with 0.6 mm
/S adapter and an
P0 0
Internal U port
P0
on the PBX
max. 1000 m with 0.6 mm