Fig. 11: COMmander 8a/b module
Terminal clamps (removable) for connecting analogue
end devices to the internal a/b ports 1-4
Terminal clamps (removable) for connecting analog end
devices to the internal a/b ports 5-8 (the terminal clamp
labelled with DIS is not in use!)
Fig. 12: COMmander VMF module
2-port switch (Ethernet) for connecting to the RJ-45
socket on the base circuit board and to the network or the
respective RJ-45 socket on the neighbouring VoIP mod-
ule
COMmander 8a/b Module Overview
COMmander VMF Module Overview
Preparation (Modules)
A connector for attachment on the base circuit board
A connector for connecting to the front panel of 19"
casing variants
A connector for attachment on the base circuit board
SD card slot
23