Commander 8U P0 Module Overview; Commander 8Voip/16Voip Module Overview - Auerswald COMmander Basic.2 Installation And Commissioning Instructions

Preparation (Modules)
Fig. 9: COMmander 8U
P0
Status display LEDs for U
Terminal clamps (removable) for connecting to the U
ports 1-4
Terminal clamps (removable) for connecting to the U
ports 5-8
Fig. 10: COMmander 8VoIP/16VoIP module
2-port switch (Ethernet) for connecting to the RJ-45
socket on the base circuit board and to the network or the
respective RJ-45 socket on the neighbouring VoIP
module
22
COMmander 8U
module
ports 1-4
P0

COMmander 8VoIP/16VoIP Module Overview

Module Overview
P0
Status display LEDs for U
A connector for attachment on the base circuit board
A connector for connecting to the front panel of 19"
P0
casing variants
P0
A connector for attachment on the base circuit board
ports 5-8
P0