Auerswald COMmander Basic.2 Installation And Commissioning Instructions page 45

– Distance/line length between the devices depends on
the cable used:
Maximum 800 m for a cable with a pair diameter of
0.6 mm
Steps to Take
1.
Lay the line.
Note: Prevent interference. Avoid laying long lengths
of parallel lines, especially next to mains. Twist the
pairs.
2.
Attach the wires to the two terminal clamps in the
internal a/b port. See Fig. 41 on page
3.
Connect the wall sockets to the terminal clamps in the
internal a/b port. See Fig.
Further Steps
Connect the end devices to the wall sockets.
Note: For TAE jacks, insert the connection plug for
the telephones or
machines into the socket labelled with "F" and insert
the connection plug of the remaining devices into the
socket labelled with "N".
Fig. 41: Wall sockets on the internal a/b port
45.
41.
combination fax/answering
Connecting Analogue End Devices
45